Specifiche materiali

Informazioni tecniche dei materiali

PTH, grazie alla pluriennale esperienza nel processo di estrusione dei vari polimeri, utilizza soltanto materiali innovativi e di alta qualità. Per questa ragione, collabora con i maggiori produttori di materie prime al fine di ottenere mescole di materiali con proprietà costanti. Tutti i materiali utilizzati sono certificati.

PMMA Transparent

Physical Nominal Value Unit Test Method
Density 1.18 g/cm3 ISO 1183
Melt Mass-Flow Rate (MFR) 2.2 g/10 min ISO 1133
Molding Shrinkage 0.40 to 0.70% ISO 294-4
Water Absorption (Equilibrium, 23°C, 50% RH) 0.30% ISO 62
Mechanical Nominal Value Unit Test Method
Tensile Stress (Yield) 83.0 MPa ISO 527-2
Tensile Strain (Yield) 5.0% ISO 527-2
Flexural Modulus 3200 MPa ISO 178
Flexural Strength 115 MPa ISO 178
Impact Nominal Value Unit Test Method
Charpy Notched Impact Strength 2.0 kJ/m2 ISO 179/1eA
Charpy Unnotched Impact Strength 20 kJ/m2 ISO 179/1eU
Notched Izod Impact Strength 2.0 kJ/m2 ISO 180/1A
Hardness Nominal Value Unit Test Method
Rockwell Hardness (M-Scale) 98 ISO 2039-2
Ball Indentation Hardness (H 961/30) 185 MPa ISO 2039-1
Thermal Nominal Value Unit Test Method
Heat Deflection Temperature
0.45 MPa, Unannealed 105°C ISO 75-2/B
1.8 MPa, Unannealed 102°C ISO 75-2/A
Vicat Softening Temperature
ISO 306/A
109°C ISO 306/B
CLTE-Flow 0.000071 cm/cm/°C ASTM E831
Flammability Nominal Value Unit Test Method
Flame Rating - UL HB UL 94
Glow Wire Flammability Index 650°C IEC 60695-2-12
UL 746 Nominal Value Unit Test Method
RTI Str (1.50 mm) 125°C UL 746
RTI Imp (1.50 mm) 115°C UL 746
RTI Elec (1.50 mm) 125°C UL 746
Optical Nominal Value Unit Test Method
Refractive Index 1.490 ISO 489
Transmittance 92.0% ASTM D1003
Haze 0.40% ASTM D1003

Materiali